The innovative touch display series WAY-AX and WAY-DX for the process control in the manufacturing of high quality products.
Better usability by a wide range of models.
Process Indicator WAY-AX
– for two analog values or potentiometer input
– applicable as flow meter, level meter, pressure meter etc.
Digital Indicator WAY-DX
– for incremental encoder or sensor signals
– applicable as counter, position meter, tachometer, frequency meter, speed meter etc.
– additional functions e.g. timer, calculation of process time, reciprocal calculation
Better Visibility by a strong contrast & high resolution
Dot Matrix Display with 186 x 64 pixel
– clear text explanations and commands are providing an intuitive menu structure
– a wide range of units as well as any kind of symbols can be displayed
Three color LCD-Backlight (green, yellow, red)
– color can be adjusted easily by just one parameter
– event depending color change, e. g. below limit, close limit, over limit
Better flexibility by touch & optional modules
Resistive Touch Panel with IP65 protection and enhanced temperature range (-20°C … 60°C)
– Suitable for rough environmental conditions
– Can be operated with any kind of working gloves, no limits on the used material
– Maximum flexibility by modular design
WAY-AX
– 2 analog inputs (16 bit), 3 control inputs
– -10 V … +10 V / 0 … 20 mA / 4 … 20 mA
– accurate 10 V reference output for potentiometers
– mode for single, dual or cross calculated inputs
– totalization, tare, average filter, etc. for each input
– totalization of sum / difference of both inputs
– linearization with 24 set points for each input
WAY-DX
– 2 incremental inputs (HTL), 3 control inputs
– for PNP, NPN or NAMUR sensors
– up to 250 kHz
– for speed, process time, timer, counter or velocity application
– linearization with 24 set points
– scaling, average filter, start up suppression
For more information please visit the product site at www.waycon.biz/products/display-controls/
WayConPositionsmesstechnik GmbH has been developing and manufacturing precision sensors for position and distance measurement since 1999. As an innovative company with headquarters in Taufkirchen near Munich and a branch in Brühl near Cologne, we sell our products all over the world. Our goal is to provide our customers with the best possible measurement technique solution: from high-quality sensors from the standard range to customer-specific solutions, from prototype to series production – for the most varied applications in industry and research. The products made in Taufkirchen are subject to rigorous quality standards and every single one is delivered to our customers with a calibration certificate.
Firmenkontakt
Waycon Positionsmesstechnik GmbH
Marcus Venghaus
Mehlbeerenstr 4
82024 Taufkirchen
089-67-9713-0
info@waycon.de
http://www.waycon.biz
Pressekontakt
Waycon Positionsmesstechnik GmbH
Marcus Venghaus
Mehlbeerenstr. 4
82024 Taufkirchen
+49 89 679713-0
presse@waycon.de
http://www.waycon.biz
