Rehm“s efficient new residue management system increases availability and lengthens maintenance cycles
As with many other thermal processes, the soldering of electronic assemblies creates solder fumes, aerosols and solid particles (residues) that need to be removed from the process cycle. With the VisionXP+, Rehm Thermal Systems has established an effective residue management system for reflow convection soldering. The continuing development of this in collaboration with customers and experience gained from over 2000 installed systems demonstrate that thermal pyrolysis is a reliable method for cleaning the process gas and reducing maintenance costs.
Without an effective residue separation system, the concentration of volatile organic compounds in the process atmosphere would increase steadily, this entailing a high risk of contamination together with a high level of maintenance and repair activity. The VisionX series from Rehm Thermal Systems has featured two trusted residue management systems for many years: pyrolysis in the heating zones plus cold condensation and filtering in the cooling line. This ensures that residues in all states – gaseous, liquid, crystalline and particles – are removed from the process gas, effectively and economically in energy terms.
In the VisionXS and VisionXP+ models, residue management functions via a combination of pyrolysis from the inflow to the peak zone plus cold condensation in the cooling line. In the pyrolysis process, long-chain molecule compounds in the solder fumes are broken down (cracked) into short-chain molecules by thermal splitting when heated (450 – 900°C). After cracking they are small enough to be deposited in the granulate and removed from the process.
The principle of cold condensation has also proven effective for gas cleaning in reflow soldering technology. It is used in all VisionX series systems – either complementing the pyrolysis in the case of the VisionXP+ or responsible for the entire residue management, as with the VisionXC. The process gas is fed through a multi-stage cooler-filter system in a closed loop, so that the residues can condense in the cooler while particles and droplets are deposited in the filter. The cleaned gas is then fed back into the process.
This effective residue management system with its two principles of functioning cleans the process gas thoroughly and reliably. The result: top soldering quality, minimal downtimes and a long service life for your Rehm equipment.
As a specialist in the field of thermal system solutions for the electronics and photovoltaics industries, Rehm is a technology and innovation leader in the modern and economical production of electronic modules. As a globally operating manufacturer of reflow soldering systems with convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for the metallisation of solar cells as well as numerous customer-specific special systems, we are represented in all relevant growth markets and, as a partner with almost 30 years of industry experience, we implement innovative manufacturing solutions that set standards.
Company-Contact
Rehm Thermal Systems GmbH
Anna-Lena Kast
Leinenstraße 7
89143 Blaubeuren
Phone: 07344 9606 746
Fax: 07344 9606 525
E-Mail: an.kast@rehm-group.com
Url: http://www.rehm-group.com
Press
Rehm Thermal Systems
Anna-Lena Kast
Leinenstraße 7
89143 Blaubeuren
Phone: 07344 9606 746
Fax: 07344 9606 525
E-Mail: an.kast@rehm-group.com
Url: http://www.rehm-group.com
Die Bildrechte liegen bei dem Verfasser der Mitteilung.
