Already in November last year PowerWalker UPS systems became compatible to Synology NAS.
In close cooperation with Synology Inc. in Taipei and their German office Synology GmbH in Duesseldorf, a direct connectivity has been established that makes PowerWalker UPS plug and play compatible to all Synology NAS systems with firmware higher than 4.1.

Consequently following this up, recently also the compatibility to models from QNAP (firmware 3.8.2 or higher) and Thecus (all 64 bit systems) was realized. Under UPS support in the energy tab of the system control panel a choice of all PowerWalker UPS is available. Only enable the UPS support, choose the connected UPS model and your NAS system is already protected against crashes caused by power outages. If the power failure takes a little longer the UPS activates the shutdown
of the NAS to protect the internal hard disks and your data.

You are welcome to visit the BlueWalker Team on the CeBIT 2013 in hall 14 stand L18
Power Walker, your reliable protection!

All mentioned product and company names are proprietary names or trademarks of the respective manufacturers.

BlueWalker GmbH is an established professional supplier for PowerWalker UPS in Germany.
The product portfolio reaches from models for home use over devices for corporate environment up to professional systems for server installations.
A wide range of accessories enables the use for many different scenarios.

PowerWalker provides secure, reliable and cost effective solutions for all UPS applications.
Especially the professional model series with RT (rack / tower) design combines secure protection with optimized use of space, premium energy efficiency, high connectivity and excellent cost-benefit ratio.

Kontakt:
BlueWalker GmbH
Theo Hillemacher
Martin-Buber-Str. 12
41470 Neuss
02137929873
press@bluewalker.eu
http://www.powerwalker.com