Tag Archives: vacuum blast method

Communication Media

Fire damage restoration without high pressure, water and chemicals

Environmentally friendly without high pressure, water and chemicals

Fire damage restoration without high pressure, water and chemicals

residue-free fire damage restoration

Fire damage restoration with vacuum blasting
environmentally friendly without high pressure, water and chemicals
Fire damages are often a difficult task for the renovators. After a fire, the walls indoors must be completely cleaned. By conventional means which work without a closed cycle, like e.g. a pressure washer or dry ice blaster, that is hardly possible.

With the cleaning machine Tornado ACS, the areas are cleaned without burdening the environment. Because of the closed cycle the removed soot remains in the cleaning machine. The Tornado ACS cleaning system enables an uncomplicated and clean fire damage restoration. In contrast to a pressure washer or sand-blaster, you can work without protective clothing.

The fire damage shown in the photo is in the hall of a skyscraper. In the first attempt, the latex wall was washed, which did not lead to the desired result. The cleaning with the vacuum blast technology leaves a brilliant white surface without any residue. The Tornado ACS cleaning machine can be used for both inside and outside, the possible area performance depending on the pollution is about 2 to 4 square meters per hour.

For fire damage restoration with the Tornado ACS cleaning machine all worn fire residues remain in a closed circuit and are disposed of only after the end of the operation. Special health and safety measures or protective clothing are not necessary, no respiratory protection must be worn while working in closed rooms.

The patented vacuum blast technology enables a clean and environmentally friendly working. The cleaning device is set up in a few minutes and ready to use. The costly disposal of contaminated cleaning materials omits as it is cleaned without high pressure, water and chemicals.

With cleaning machine Tornado ACS, you can not only make an effective fire damage restoration, but also remove algae, moss, rust, saltpeter and graffiti without leaving residues on facades, walls and house walls. In this case, the cleaning device is easy to use for everyone.

High pressure cleaner, sand-blaster and dry ice blasting are well known. But the procedures have a large common disadvantage. The dissolved dirt and partially the blast media are not collected. Meanwhile cleaning companies are obliged to collect the residues and dispose them properly, which results to an enormous effort of cost and time.

systeco stands for effective and environmentally friendly cleaning procedures. The company salvages for solid quality and long-life products. Since 2005 we are experts for difficult and persistent surface contaminations. On our website www.systeco.com (http://www.sys-teco.com) you can get all information of the systeco cleaning and is various application possibilities.
Uwe Dyballa

production and sales of vacuum blasting systems

Kontakt
systeco Vertriebs GmbH
Uwe Dyballa
Herbartstraße 28
14057 Berlin
+493032702157
+493032702134
dyballa@sys-teco.de
http://www.sys-teco.com

Trading Services

QR Codes in the Cemetery

Grave stones with a QR Code are always in demand

QR Codes in the Cemetery

QR code on granite

Lately the demand for QR codes on grave stones has increased significantly. Many customers want to add a QR code to the grave stone subsequently. No problem for the vacuum blast machine Tornado ACS. It is operated with negative instead of high pressure. This patented principle is a combined unit of a powerful suction unit, a jet hood and a jet intake. For a QR code of the size 20 x 20 cm takes about 30 minutes on site.

The 3 Jewish cemeteries in Berlin are using it already. At the entrance, a QR code is engraved in each place (Quick Response Code). The square, black and white pattern is scanned with a smartphone camera and in this case leads to a memorial site on the Internet.
Two Berlin stonemasons already offer QR codes on grave stones. Here, the stonemason creates the QR code by a template. The relatives of the deceased are themselves responsible for the content, the stonemason is only engraving.

The cemetery administrations of most federal states have no objections, only with a few exceptions. In Cologne QR codes were planned to be banned before. Opponents argue, that the content of the linked pages is uncontrollable – in contrary to classical grave creation with flower and candles. But the liberalization on cemeteries can be stopped anymore. The advantages of a digital cemetery are on hand. By this QR codes mourning and commemoration are digitally upgraded.

For the creation of QR codes different possibilities are there. These can be hand-carved, routed or blasted. Effective and fast is only possible with the patented vacuum-blast method of systeco. That way, QR codes, but also graphics and photos can be applied in the workshop or directly in the cemetery on the stone. Even the smallest details can be blasted in amazing depth.

First, the desired QR code must be generated on a PC, that way a reflective sheet is created. This is normally glued on to the granite surface. Afterwards the jet hood is placed on the worked on surface and the suction unit is started. Due to the reached negative pressure, the jet hood adheres to the surface. The blasting agent is sucked through the jet lance on the surface and gets there with about 400 km / h. The suction takes the blast media right back in. Blast media and debris are separated by a cyclone principle. That way no dust develops, you work environmentally friendly and the blast media must not be collected or swept afterwards. With the vacuum blast method you work in a closed cycle. The granulate can be reused up to a 100 times.

For blasting only a 230 V connection is required – not more. The work can be done by anyone. Special skills are not required. The closed cycle of the cleaning machine Tornado ACS enables a dust-free work without protective clothes. On our website www.sys-teco.com (http://www.sys-teco.com) , you can find all detailed information of the vacuum blast machine Tornado ACS and its various application possibilities.

Uwe Dyballa

production and sales of vacuum blasting systems

Kontakt
systeco Vertriebs GmbH
Uwe Dyballa
Herbartstraße 28
14057 Berlin
+493032702157
dyballa@sys-teco.de
http://www.sys-teco.com

Trading Services

Photorealistic sandblasting without high pressure

Sounds impossible, but it works!

Photorealistic sandblasting without high pressure

Photorealistic sandblasting

It is operated with negative instead of high pressure. This by patent law protected principle is a combined unit of a powerful suction unit, a jet hood and blast media absorption. For blasting only a power supply of 230V is required.

The blast equipment is build up in a few minutes and ready to work. Because it is works without high pressure, water and chemicals in a closed cycle, the costly disposal of polluted detergents doesn´t apply. Debris and granules are absorbed again directly from the blast equipment.

The sandblast foil is glued on the granite surface. Then the jet hood is place on the surface to be machined and the unit is started. Due to the reached negative pressure the jet hood adheres to the subsoil. The blasting agent is sucked through a jet lance on the surface with approximately 400 km/h.

The suction absorbs the blast media directly. Blast media and debris are separated by cyclone principle. That way no dust develops during blasting. The work is environmentally friendly and afterwards the blast media doesn´t have to be collected and swept up. The vacuum blast method is operating in a permanent cycle. The same granulate can be re-used up to 100 times.

That way writing, graphics and photos can be applied directly on the cemetery or workshop.
Even the finest details on photos, graphics and QR-codes can be blasted on the material with astonishing depth. If motifs are blasted with the high-resolution foil of Strahlfolien.de, you can relocate the jet cap easily without damaging or moving the pixels of the sandblast foil. That way, Also bigger motifs can be created good and safe – even on site of the cemetery.

Lately the demand of QR codes on tombstones has significantly increased. Many customers would like to put QR codes on the tombstone subsequently. No problem for vacuum blast machine Tornado ACS. For a photo of the size 20 x 20 cm it takes about 30 minutes on site.

The jet hood is equipped with a soft and smooth sponge rubber layer, so that also uneven and strained surfaces can be blasted. That way it is possible to remove pollutes and graffiti from facades and rough cast.

Unfortunately you find them everywhere, graffiti of all sizes on facades, monument, bridges and other buildings. Especially very nice objects are used as undercoat. There are many different methods for the removal of graffiti depending on surface and size. Definitely the graffiti has to disappear quickly. A rule applies: the earlier graffiti is removed, the easier it is.
Here as well the vacuum blast machine can be used mobile and without polluting the environment. Cleaning can be done during public business. Special safety measures are not required. Find out more about photorealistic sandblasting at http://www.sys-teco.com

Uwe Dyballa
General Manager

production and sales of vacuum blasting systems

Kontakt
systeco Vertriebs GmbH
Uwe Dyballa
Herbartstraße 28
14057 Berlin
+493032702157
dyballa@sys-teco.de
http://www.sys-teco.com