Tag Archives: Fans

Science Research Technology

perma Lubrication Systems for Electric Motors

perma Lubrication Systems for Electric Motors

perma STAR VARIO are lubricating an Electric Motor

Euerdorf, Germany – Electric motors are found in all types of applications – fans, blowers, pumps, conveyors, etc. The importance of the electric motor is usually not recognized until it fails. Optimal lubrication is the key to increase process safety, equipment service life and productivity.

Many electric motors are difficult to lubricate because they are located in hard-to-access and dangerous areas. As a result, many lubrication points on labyrinth seals and on drive- and non-drive sides are not lubricated as often as required, which leads to damaged bearings and eventually equipment failure.

perma-tec offers single- and multi-point lubrication systems and a large range of suitable accessories which ensure safe and continuous electric motor lubrication. Extension lines make it possible to install the systems in easily accessible and safe places. This not only increases workplace safety, but also ensures that electric motors are lubricated according to manufacturer specifications. System exchanges can be carried out without any special tools and can be scheduled to take place during regular maintenance runs. This reduces maintenance time and expenses.

The single-point lubrication system perma NOVA is ideal for the lubrication of electric motors. It is temperature independent (at -20 °C to +60 °C) and the discharged lubricant amount can be programmed to meet individual motor requirements. A precise lubricant discharge during operation prevents lubrication starvation as well as over-lubrication. It reduces lubricant consumption and contributes to environmental protection. The housing is dust-tight and protected against water jets (IP65).

For more information on electric motor lubrication you may download our flyer „perma Lubrication Systems for Electric Motors“ from the perma website download center www.perma-tec.com or view our Video „Electric motors“.

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Internet E-Commerce Marketing

fanmondo.de Fans, Followers, Likes, Video-Views und vieles mehr kaufen.

fanmondo.de Fans, Followers, Likes, Video-Views und vieles mehr kaufen.

fanmondo.de

Viele fragen sich ob das überhaupt Sinn macht oder nur raus geschmissenes Geld ist. Dieser Services ist nicht umsonst entstanden. Es gibt im Social Web Zahlen, die auf den ersten Blick wahrgenommen werden und damit eine wichtige Rolle übernehmen, wie attraktiv eine Fanpage, ein YouTube Kanal oder ein Twitter Account ist. Ein Twitter-Account mit 20.000 Abonnenten wirkt „verlockender“ als einer mit nur 100 Follower. So sieht es auch auf Facebook aus, wo 10.000 Likes ebenfalls mehr Eindruck machen als 100, oder ein YouTube Video mit 15000 Views und eines mit 65. Ein positives Fan-Follower-Verhältnis ist ein positives Signal für die Netzwerke und auch für die Nutzer selber. Viele Website-Betreiber sind sehr von Google als Traffic-Lieferant abhängig, so ist es für viele sehr interessant mehr Besucher von Facebook, Twitter, YouTube und Co. zu bekommen. Doch gerade schwierig ist es z.B. für ein Sturtup. Das Unternehmen ist neu, die sozialen Netzwerke eingerichtet und die Zählerstände bei Facebook, YouTube und allen andern stehen bei 0. Da kommt fanmondo.de ins Spiel. Die Likes, Views, Followers und Kommentare werden bei fanmondo.de gekauft. Fanmondo als Social Marketing Experte generiert durch Platzierung von Werbemaßnahmen Likes, Views, Follower und Likes für jedes soziales Netzwerk. Hat man also erstmal ein gewisses Niveau erreicht, ist es einfacher neue Fans und Follower zu gewinnen. Aber bis zu diesem Punkt muss man erstmal kommen. Wer Fans kauft und hofft ohne weitere Bemühungen diese behalten zu können oder neue zu generieren der irrt. Jeder User will interessante Beiträge, Posts, Bilder und Videos sehen, sonst bringt auch der Zukauf solcher Fans keinem Unternehmen etwas. Fanmondo begleitet auf Wunsch jedes Unternehmen seine Fans, Likes, Views und Follower nach einem bestimmten Zeitraum, organisch selber zu generieren und nach Erreichen einer angemessenen Anzahl von gekauften Views, Likes und Fans, diesen Dienst nicht mehr in Anspruch zu nehmen.

Fanmondo.de Social Marketing Made in Germany
Social Marketing für Ihr soziales Netzwerk. Wir bieten für folgende Sozialen Netzwerke unsere Dienstleistungen an, Facebook, YouTube, Google, Instagram, Vimeo, Twitter und Soundcloud. Ob Sie Views für Ihre Videos, Likes für Page oder Bilder, Facebook Fans, Downloads und Plays für Soundcloud, oder Follower auf Twitter brauchen, wir können alles! Unsere Leistungen erhalten Sie zu fairen Preisen und einen professionellen Service kostenlos dazu. Wir betreuen Sie und lassen Sie nicht im Stich!

Kontakt
fanmondo.de
Grigorios Mayer
Dr. Wilhelm Schmidt Str. 18
36167 Nüsttal
066849170114
info@fanmondo.de
http://www.fanmondo.de

Wirtschaft Handel Maschinenbau

Zubits – magnetische Schuhbinder: Nie wieder Schuhe binden!

Zubits - magnetische Schuhbinder: Nie wieder Schuhe binden!

Zwei Kölner wollen magnetische Schuhbinder in Deutschland etablieren.

Köln. Kein Schnüren, keine Schleifen und keine Knoten: Zubits Magnetische Schuhbinder sind auf dem deutschen Markt angekommen. Zwei junge Unternehmer aus Nordrhein-Westfalen sind exklusiver Importeur von Zubits Deutschland – und wollen mit dem magnetischen Verschluss den deutschen Schuhmarkt revolutionieren. Die Erfindung des Amerikaners Ryan Wiens hat nach einer erfolgreiche Crowdfunding-Kampagne bereits Tausende Fans. Und Zubits sind mehr, als nur die einfachste und schnellste Lösung beim Schuhe binden.

„Wir freuen uns darauf, ein so innovatives Produkt auf den deutschen Markt zu bringen“, sagt Geschäftsführer Robin d‘Alquen. „Durch die vielfältigen Anwendungsbereiche sprechen wir eine breite Zielgruppe an.“ Zubits Magnetische Schuhbinder sind keine handelsüblichen Magnete. Extrem starke Neodym-Magnete konzentrieren und multiplizieren die magnetischen Kräfte nach dem zum Patent angemeldeten "magnetic array"-Prinzip. Sie sorgen für einen perfekten Halt, in jeder Situation. Im Sport- und bei Freizeitsektor eignen sich die praktischen, kleinen Alltagshelfer an den Schuhen. Selbst großer Beanspruchung beim Joggen oder Tanzen halten die Magneten Stand. Ebenso sind sie für schicke Stiefel oder Outdoor-Schuhe geeignet. Zubits sind praktische Helfer im Alltag – für jedes Alter.

Eine weitere, wachsende Zielgruppe: Zubits ersparen Seniorinnen und Senioren das Schuhe binden und können so für mehr Selbstständigkeit im Alltag sorgen. „Gerade hilfsbedürftige Menschen profitieren von der perfekten Praktikabilität“, sagt Robin d’Alquen.


Zubits gibt es in drei Größen und sechs verschiedenen Farben. In wenigen Minuten sind die kleinen Magnete mit einfachen Handgriffen in die Schnürsenkel gezogen. Einen Link zur Anleitung liegt jeder Bestellung bei. Auf den Online-Plattformen „ebay“ und „Amazon“ bieten die beiden Kölner ihre Zubits bereits an. Auch auf der deutschen Webseite www.zubits.de kann man die magnetischen Schuhbinder bestellen und sich vom Produkt überzeugen lassen.

Zubits Deutschland GbR

Beethovenstraße
 27
50674 Köln

Mail: info@zubits.online

Firmenkontakt
Zubits Deutschland GbR
Robin d’Alquen
Beethovenstraße 27
50674 Köln

info@zubits.de
www.zubits.de

Pressekontakt
Zubits Deutschland GbR
Robin d\’Alquen
Beethovenstraße 27
50674 Köln
4917628915790
info@zubits.de
www.zubits.de

English Press Releases

perma NOVA: Temperature Independent Electrochemical Lubrication System

perma NOVA: Temperature Independent Electrochemical Lubrication System

perma NOVA 125 on a blower

Euerdorf, Germany – If you have ever used electrochemical lubrication systems, you know the effect that fluctuating ambient temperatures have on lubricant discharge and discharge period. perma-tec, the leading manufacturer of single-point lubrication systems, was successful in developing the perma NOVA, an electrochemical system which can compensate temperature fluctuations.

Continuous lubrication – even at fluctuating temperatures

perma-tec optimized its electrochemical drive by adding a component which automatically off-sets temperature fluctuations. For operators this means that perma NOVA can be used for applications that require reliable and optimized lubrication especially in areas with considerable temperature variations like in the food industry or in outdoor applications. The innovative control unit allows the user to select and program discharge periods from 1 to 12 months. Selected discharge periods can quickly be changed at any time in order to meet current lubrication requirements.

perma NOVA comes in two sizes (65 cm³ / 125 cm³) and is ideal for the lubrication of electric motors or blowers and fans operating at temperatures ranging from -20 °C to+60 °C and for applications in ex-proof areas. It is extremely easy to use, to install and to exchange. The transparent housing makes it possible to check the fill level at any time.

Optimized maintenance intervals

perma NOVA reduces maintenance costs by minimizing maintenance runs and increasing equipment availability. At the same time it increases workplace safety as it reduces the time that maintenance workers have to spend in dangerous areas. More details on perma NOVA can be found in our product catalog or our website www.perma-tec.com (http://www.perma-tec.com).

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Business Economy Finances

perma STAR VARIO Generation 2.0 – Redefines User-friendliness

perma STAR VARIO Generation 2.0 - Redefines User-friendliness

perma STAR VARIO

Euerdorf, Germany – Lubrication plays an important role in maintenance programs. Equipment breakdowns caused by insufficient or incorrect lubrication can have fatal and costly consequences. In some cases they can even stop the entire production. Correct lubrication is therefore a basic requirement for trouble-free operation. The new perma STAR VARIO ensures optimum lubrication regardless of changing temperatures, high counter pressure, or contamination at the lubrication point.

The electromechanical lubrication system was invented 15 years ago and has proven itself in all kinds of industries. The new version offers many improvements: LCD-display with push button control, all around LED lights and a new design.

The LCD-display with push button control is self-explanatory and makes programming extremely simple. The all around LED signal offers visual control of the operating status even from a distance. The system assembles and installs in just minutes. With a pressure build-up of up to 6 bar it works reliably over a wide temperature range from -10 °C to +60 °C.

Fast, easy set up

perma STAR VARIO consists of a transparent LC unit filled with oil or grease, a powerful battery set, and a reusable drive unit. Just insert the battery, screw drive unit and LC unit together, push the button to enter the desired discharge period (1 – 12 months) and LC size (60, 120, 250 cm³) and the system is ready to go.

One lubrication system for all types of applications

perma STAR VARIO is suitable for indoor or outdoor applications with high or low ambient temperatures. The high pressure build-up to 6 bar makes it possible to install perma STAR VARIO at remote locations, away from dangerous areas, with extension tubes up to a length of 5 meters. Not only does this save time when the lubrication system is exchanged, but it also tremendously reduces the risk of workplace accidents. With its three different sizes and many possible settings, perma STAR VARIO is a preferred system for electric motors with very specific relubrication amounts. The all around LED signal light lets you monitor the operational status from a distance. The new design protects the drive unit from water and makes the system better suited for applications in moist and wet surroundings.

Environmentally friendly lubrication

perma STAR VARIO can be individually programmed to exactly meet the lubrication requirements of different applications. The system continuously discharges small lubricant amounts at specified intervals. This lowers lubricant consumption and prevents over-lubrication and lubricant spills. The reusable drive unit reduces maintenance costs and saves valuable resources. We are taking service a step further.

Our extensive perma accessory range includes connecting parts for just about all applications like electric motors, conveyor systems, pumps, fans and blowers. To make your start into perma automatic lubrication easier, we have developed special mounting sets. Our perma SELECT software helps you find the ideal lubrication system and the most suitable lubricant for your application. You can download it free of charge. Our team of lubrication experts will be glad to answer any questions, assist you with challenging applications, or visit you on site.

Technical data:

Drive – reusable: Electromechanical
Power supply: STAR VARIO battery set 4.5 V
Discharge period: 1, 2, 3, … 12 months
Lubricant volume: 60 cm³, 120 cm³ or 250 cm³
Operating temperature: -10 °C to +60 °C
Pressure build-up: 6 bar
Protection class: IP 65
Lubricants: Oil / grease up to NLGI 2
Certifications: UL

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

perma FLEX – The All-in-one Lubrication System in Two Compact Sizes

perma FLEX - The All-in-one Lubrication System in Two Compact Sizes

perma FLEX on a fan

Euerdorf, Germany – The basic requirement for a long bearing / chain service life is optimum lubrication. In-correct lubrication results in damages and equipment breakdown. The new all-in-one lubrication system perma FLEX from perma-tec provides reliable 24 hour, year round lubrication for all types of industries and a-plications.

Immediately ready to use

perma FLEX requires no assembly or special tools. Just unpack, turn the rotary switch to the desired discharge period and screw the system into your lubrication point. The discharge period (in monthly steps of 1 to 12 months) can be changed anytime after activation and the two sizes are perfect for small or tight spaces (size 125 cm³ = 117 mm high / size 60 cm³ = 85 mm high). During longer machine downtimes, perma FLEX can be completely turned off. This flexibility makes perma FLEX ideal for different lubrication point requirements.
perma FLEX makes preventive maintenance practices easier and safer. Longer maintenance intervals and remote mounting significantly reduce the interface between maintenance staff and dangerous operating equipment. This in-creases workplace safety and is more cost effective.

Tried, tested, and proven

The system was successfully tested in the market. The practical experience shows that perma FLEX can be used on all applications that require reliable and optimum relubrication, e.g. on bearings, chains, sliding guides, open gears, gear racks, shaft seals and more. The system is extremely flexible and can even be mounted up-side-down. It performs reliably in extremely moist and dirty areas (protection class IP 68) and in hot and cold environments (-20 °C to +60 °C).

Service included

To ensure that perma FLEX matches all requirements of your lubrication point, perma-tec offers the largest range of lubricants and accessories in the market of automatic lubrication systems. If you have any questions, our team of application engineers will be glad to help. If requested, our perma SERVICE team will come to your premises.

Technical Data
Drive: Gas generating unit
Discharge period: 1, 2, 3, … 12 months
Lubricant volume: 60 cm³ or 125 cm³
Operating temperature range: -20 °C to +60 °C
Pressure build-up: Max. 5 bar
Protection class: IP 68
Lubricants: Grease up to NLGI 2 / oil
Certification: Ex-proof

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

perma Lubrication Systems for Electric Motors

perma Lubrication Systems for Electric Motors

Flyer: perma Lubrication Systems for Electric Motors

Euerdorf, Germany – Electric motors are found in all types of applications – fans, blowers, pumps, conveyors, etc. The importance of the electric motor is usually not recognized until it fails. Optimal lubrication is the key to increase process safety, equipment service life and productivity.

Many electric motors are difficult to lubricate because they are located in hard-to-access and dangerous areas. As a result, many lubrication points on labyrinth seals and on drive- and non-drive sides are not lubricated as often as required, which leads to damaged bearings and eventually equipment failure.

perma-tec offers single- and multi-point lubrication systems and a large range of suitable accessories which ensure safe and continuous electric motor lubrication. Extension lines make it possible to install the systems in easily accessible and safe places. This not only increases workplace safety, but also ensures that electric motors are lubricated according to manufacturer specifications. System exchanges can be carried out without any special tools and can be scheduled to take place during regular maintenance runs. This reduces maintenance time and expenses.

The single-point lubrication system perma NOVA is ideal for the lubrication of electric motors. It is temperature independent (at -20 °C to +60 °C) and the discharged lubricant amount can be programmed to meet individual motor requirements. A precise lubricant discharge during operation prevents lubrication starvation as well as over-lubrication. It reduces lubricant consumption and contributes to environmental protection. The housing is dust-tight and protected against water jets (IP65).

For more information on electric motor lubrication you may download our flyer „perma Lubrication Systems for Electric Motors“ from the perma website download center www.perma-tec.com (http://www.perma-tec.com)m or view our Video „Electric motors“.

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Sonstiges

Zavarius High-End-Fernglas FG-350.b91, 7×35, 91% Transmission

Gestochen scharfe Fernsicht für Outdoor-Fans

Zavarius High-End-Fernglas FG-350.b91, 7x35, 91% Transmission

Zavarius High-End-Fernglas FG-350.b91, 7 x 35, 91% Transmission, www.pearl.de

Buggingen, 26. August 2015 – Egal ob zu Wasser, auf dem Land oder im Gebirge: Feldstecher und Monokulare holen selbst weit entfernte Objekte ganz nah heran. Besonders für Vogel- und Naturbeobachter, Jäger, Bergsteiger und Wassersportler ist die scharfe und klare Sicht auf große Entfernungen ein Muss. Mit dem High-End-Fernglas FG-350.b91 von der Marke Zavarius , bietet der Versender Pearl jetzt eine professionelles Gerät zum Spitzenpreis für die o.g. Zielgruppe an.

Top-Fernglas mit 91 % Transmission
Atemberaubende Details in der Natur lassen sich mit dem starken Feldstecher für sehr günstige 79,90 Euro entdecken. Das Gerät im Taschenformat mit 35-mm-Objektiv und stoßfestem Metallgehäuse ist der ideale Begleiter für Outdoor-Fans. Die 7-fache Vergrößerung und das große Sehfeld von rund 158 Meter sorgen für optimale Übersicht und ein eindrucksvolles Panorama. Highlight des Fernglases ist die sehr hohe Transmission von 91 %, die selbst die Transmission von sehr viel teureren Spitzengeräten übertrifft. Durch diese hohe Lichtdurchlässigkeit ist das Bild angenehm hell und Naturobjekte werden kontrastreich und vor allem farbgetreu wiedergegeben. Für die exzellente Detailauflösung sorgt das BaK4-Prisma. Zudem ermöglicht die hochwertige Vergütung der Optik scharfe Bilder ohne störende Reflexe. Dank des großen Fokussierrades sind Gegenstände im Nu scharf gestellt. Und selbst bei Morgennebel beschlagen die Gläser nicht. Besonders angenehm sind die weichen Augenmuscheln, vor allem bei langen Beobachtungen. Die Okulare haben einen Durchmesser von 23 mm und einen Abstand von 57 bis 74 mm. Das Fernglas kann perfekt an den Beobachter angepasst werden: mit dem praktischen Doppelgelenk und dem Dioptrienausgleich von -4D bis +4D Dioptrien.
Das Gerät enthaltet neben den Schutzkappen ein Reinigungstuch sowie eine praktische Tasche zur Aufbewahrung und zum Transport des Glases.

Fazit: Das Gerät bietet viele praktische Features und ermöglichen bei Outdoor-Aktivitäten eine beeindruckende Fernsicht durch die 7-fache Vergrößerung und die hochwertige Top-Optik.

Zavarius High-End Fernglas FG-350.b91, 7 x 35, 91% Transmission
Preis: 79,90 EUR statt empfohlenem Herstellerpreis von 399,90 EUR
Bestell-Nr. NX-4148 Produktlink: http://www.pearl.de/a-NX4148-4233.shtml

PEARL.GmbH aus Buggingen ist das umsatzstärkste Unternehmen eines internationalen Technologie-Konzerns. Ihr Schwerpunkt ist der Distanzhandel von Hightech-Produkten. Mit 10 Millionen Kunden, 10 Millionen gedruckten Katalogen pro Jahr, einer täglichen Versandkapazität von bis zu 40.000 Paketen – alleine in Deutschland – und Versandhaus-Niederlassungen in Österreich, der Schweiz, Frankreich und China gehört PEARL zu den größten Versandhäusern für Neuheiten aus dem Technologie-Bereich. Eigene Ladengeschäfte in vielen europäischen Großstädten und ein Teleshopping-Unternehmen mit großer Reichweite in Europa unterstreichen diesen Anspruch. In Deutschland umfasst das Sortiment von PEARL ca. 15.000 Produkte und über 100 bekannte Marken wie z.B. FreeSculpt, NavGear, simvalley MOBILE oder TOUCHLET. Dank ihrer äußerst engen Kooperation mit internationalen Großherstellern und Entwicklungsfirmen hat PEARL.GmbH einen starken Einfluss auf die Neuentwicklung und kontinuierliche Optimierung von Produkten. (www.pearl.de).

Kontakt
PEARL.GmbH
Heiko Loy
PEARL-Straße 1-3
79426 Buggingen
07631-360-417
presse@pearl.de
http://www.pearl.de

Science Research Technology

perma Lubrication Systems for Conveyors

perma Lubrication Systems for Conveyors

Title / Flyer: perma Lubrication Systems for Conveyors

Euerdorf, Germany – Conveyors are needed in all types of industries worldwide. They operate in difficult environments like the extreme weather of the quarrying industry or the hygienically sensitive conditions of the food industry. Proper conveyor lubrication is very important, but also presents a challenge for a range of reasons.
Application conditions are normally aggressive due to high levels of contamination and high loads. Long walking distances, ladders and stairs are often needed for the manual lubrication of drive and guide pulleys. Rotating conveyor belts make it difficult and dangerous to manually lubricate the equipment. Manufacturer recommended lubrication intervals can hardly be met. But improper lubrication damages conveyor systems and eventually results in equipment downtime.
perma STAR VARIO is ideal for the lubrication of conveyor systems. It can be programmed to discharge the exact amount of lubricant required by individual lubrication points over a certain period. This prevents over or under lubrication and contamination.
Different applications require different lubrication systems, accessories and special lubricants. The lubrication specialists at perma-tec will help you select the ideal lubricant, the right system and the best accessories to fit your application. perma Automatic lubrication systems help you to prevent costly machine downtimes because they seal conveyor bearings against water and dirt and continuously provide the right lubricant, in the exact amount, at the right time. This results in longer equipment service life and less maintenance. Exchanges can be scheduled and do not require any special tools. Our large range of accessories and extensions makes it easy to lubricate any lubrication point. Hard-to-reach and dangerous lubrication points can easily be lubricated with extension lines. This reduces the time that workers spend in these areas and increases workplace safety.
For more information on conveyor lubrication you may download our flyer „perma Lubrication Systems for Conveyors“ from the perma website download center www.perma-tec.com (http://www.perma-tec.com) or view our Video „Conveyors“.

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.
perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.
With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

perma Lubrication Systems: Electric Motors

perma Lubrication Systems: Electric Motors

Flyer: perma Lubrication Systems: Electric Motors

Electric motors are found in all types of applications – fans, blowers, pumps, conveyors, etc. The importance of the electric motor is usually not recognized until it fails. Optimal lubrication is the key to increase process safety, equipment service life and productivity.

Many electric motors are difficult to lubricate because they are located in hard-to-access and dangerous areas. perma-tec offers a variety of solutions which can ensure safe and continuous electric motor lubrication. Extension lines make it possible to install the systems in easily accessible and safe places. This not only increases workplace safety, but also ensures that electric motors are lubricated according to manufacturer specifications.

perma lubrication systems can also be mounted directly on electric motors – even during operation. The exchange is simple and requires no tools. This reduces maintenance time and expenses.

perma-tec offers single-point lubrication systems, multi-point lubrication systems and a large range of suitable accessories and lubricants. The lubricant amount can be individually programmed to meet individual motor requirements. This prevents excess lubrication and lubrication starvation.
For more information on electric motor lubrication please contact us or download the flyer „perma Lubrication Systems for Electric Motors“ from the perma website download center www.perma-tec.com (http://www.perma-tec.com) .

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.
perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.
With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com