Tag Archives: conveyor

Science Research Technology

perma STAR VARIO Gen. 2.0

One lubrication system for all types of applications

perma STAR VARIO Gen. 2.0

perma STAR VARIO installed on an electric motor

Euerdorf, Germany – Lubrication plays an important role in maintenance programs. Equipment breakdowns caused by insufficient or incorrect lubrication can have fatal and costly consequences. In some cases they can even stop the entire production. Correct lubrication is therefore a basic requirement for trouble-free operation. The new perma STAR VARIO ensures optimum lubrication regardless of changing temperatures, high counter pressure, or contamination at the lubrication point.

The electromechanical lubrication system was invented 15 years ago and has proven itself in all kinds of industries. The new version offers many improvements: LCD-display with push button control, all around LED lights and a new design.

The LCD-display with push button control is self-explanatory and makes programming extremely simple. The all around LED signal offers visual control of the operating status even from a distance. The system assembles and installs in just minutes. With a pressure build-up of up to 6 bar it works reliably over a wide temperature range from -10 °C to +60 °C.

Fast, easy set up

perma STAR VARIO consists of a transparent LC unit filled with oil or grease, a powerful battery set, and a reusable drive unit. Just insert the battery, screw drive unit and LC unit together, push the button to enter the desired discharge period (1 – 12 months) and LC size (60, 120, 250 cm³) and the system is ready to go.

One lubrication system for all types of applications

perma STAR VARIO is suitable for indoor or outdoor applications with high or low ambient temperatures. The high pressure build-up to 6 bar makes it possible to install perma STAR VARIO at remote locations, away from dangerous areas, with extension tubes up to a length of 5 meters. Not only does this save time when the lubrication system is exchanged, but it also tremendously reduces the risk of workplace accidents. With its three different sizes and many possible settings, perma STAR VARIO is a preferred system for electric motors with very specific relubrication amounts. The all around LED signal light lets you monitor the operational status from a distance. The new design protects the drive unit from water and makes the system better suited for applications in moist and wet surroundings.

Environmentally friendly lubrication

perma STAR VARIO can be individually programmed to exactly meet the lubrication requirements of different applications. The system continuously discharges small lubricant amounts at specified intervals. This lowers lubricant consumption and prevents over-lubrication and lubricant spills. The reusable drive unit reduces maintenance costs and saves valuable resources. We are taking service a step further.

Our extensive perma accessory range includes connecting parts for just about all applications like electric motors, conveyor systems, pumps, fans and blowers. To make your start into perma automatic lubrication easier, we have developed special mounting sets. Our perma SELECT software helps you find the ideal lubrication system and the most suitable lubricant for your application. You can download it free of charge. Our team of lubrication experts will be glad to answer any questions, assist you with challenging applications, or visit you on site.

Technical data

Drive – reusable: Electromechanical
Power supply: TAR VARIO battery set 4.5 V
Discharge period: 1, 2, 3, … 12 months
Lubricant volume: 60 cm³, 120 cm³ or 250 cm³
Operating temperature: -10 °C to +60 °C
Pressure build-up: 6 bar
Protection class: IP 65
Lubricants: Oil / grease up to NLGI 2
Certifications: UL

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Contact
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
Phone: +49 9704 609-3663
E-Mail: d.bauer@perma-tec.de
Url: http://www.perma-tec.com

Business Economy Finances

perma FLEX – The All-in-one Lubrication System in Two Compact Sizes

perma FLEX - The All-in-one Lubrication System in Two Compact Sizes

perma FLEX on a fan

Euerdorf, Germany – The basic requirement for a long bearing / chain service life is optimum lubrication. Incorrect lubrication results in damages and equipment breakdown. The new all-in-one lubrication system perma FLEX from perma-tec provides reliable 24 hour, year round lubrication for all types of industries and applications.

Immediately ready to use

perma FLEX requires no assembly or special tools. Just unpack, turn the rotary switch to the desired discharge period and screw the system into your lubrication point. The discharge period (in monthly steps of 1 to 12 months) can be changed anytime after activation and the two sizes are perfect for small or tight spaces (size 125 cm³ = 117 mm high / size 60 cm³ = 85 mm high). During longer machine downtimes, perma FLEX can be completely turned off. This flexibility makes perma FLEX ideal for different lubrication point requirements.
perma FLEX makes preventive maintenance practices easier and safer. Longer maintenance intervals and remote mounting significantly reduce the interface between maintenance staff and dangerous operating equipment. This increases workplace safety and is more cost effective.

Tried, tested, and proven

The system was successfully tested in the market. The practical experience shows that perma FLEX can be used on all applications that require reliable and optimum relubrication, e.g. on bearings, chains, sliding guides, open gears, gear racks, shaft seals and more. The system is extremely flexible and can even be mounted up-side-down. It performs reliably in extremely moist and dirty areas (protection class IP 68) and in hot and cold environments (-20 °C to +60 °C).

Service included

To ensure that perma FLEX matches all requirements of your lubrication point, perma-tec offers the largest range of lubricants and accessories in the market of automatic lubrication systems. If you have any questions, our team of application engineers will be glad to help. If requested, our perma SERVICE team will come to your premises.

Technical Data
Drive: Gas generating unit
Discharge period: 1, 2, 3, … 12 months
Lubricant volume: 60 cm³ or 125 cm³
Operating temperature range: -20 °C to +60 °C
Pressure build-up; Max. 5 bar
Protection class: IP 68
Lubricants: Grease up to NLGI 2 / oil
Certification: Ex-proof

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Business Economy Finances

perma STAR VARIO Generation 2.0 – Redefines User-friendliness

perma STAR VARIO Generation 2.0 - Redefines User-friendliness

perma STAR VARIO

Euerdorf, Germany – Lubrication plays an important role in maintenance programs. Equipment breakdowns caused by insufficient or incorrect lubrication can have fatal and costly consequences. In some cases they can even stop the entire production. Correct lubrication is therefore a basic requirement for trouble-free operation. The new perma STAR VARIO ensures optimum lubrication regardless of changing temperatures, high counter pressure, or contamination at the lubrication point.

The electromechanical lubrication system was invented 15 years ago and has proven itself in all kinds of industries. The new version offers many improvements: LCD-display with push button control, all around LED lights and a new design.

The LCD-display with push button control is self-explanatory and makes programming extremely simple. The all around LED signal offers visual control of the operating status even from a distance. The system assembles and installs in just minutes. With a pressure build-up of up to 6 bar it works reliably over a wide temperature range from -10 °C to +60 °C.

Fast, easy set up

perma STAR VARIO consists of a transparent LC unit filled with oil or grease, a powerful battery set, and a reusable drive unit. Just insert the battery, screw drive unit and LC unit together, push the button to enter the desired discharge period (1 – 12 months) and LC size (60, 120, 250 cm³) and the system is ready to go.

One lubrication system for all types of applications

perma STAR VARIO is suitable for indoor or outdoor applications with high or low ambient temperatures. The high pressure build-up to 6 bar makes it possible to install perma STAR VARIO at remote locations, away from dangerous areas, with extension tubes up to a length of 5 meters. Not only does this save time when the lubrication system is exchanged, but it also tremendously reduces the risk of workplace accidents. With its three different sizes and many possible settings, perma STAR VARIO is a preferred system for electric motors with very specific relubrication amounts. The all around LED signal light lets you monitor the operational status from a distance. The new design protects the drive unit from water and makes the system better suited for applications in moist and wet surroundings.

Environmentally friendly lubrication

perma STAR VARIO can be individually programmed to exactly meet the lubrication requirements of different applications. The system continuously discharges small lubricant amounts at specified intervals. This lowers lubricant consumption and prevents over-lubrication and lubricant spills. The reusable drive unit reduces maintenance costs and saves valuable resources. We are taking service a step further.

Our extensive perma accessory range includes connecting parts for just about all applications like electric motors, conveyor systems, pumps, fans and blowers. To make your start into perma automatic lubrication easier, we have developed special mounting sets. Our perma SELECT software helps you find the ideal lubrication system and the most suitable lubricant for your application. You can download it free of charge. Our team of lubrication experts will be glad to answer any questions, assist you with challenging applications, or visit you on site.

Technical data:

Drive – reusable: Electromechanical
Power supply: STAR VARIO battery set 4.5 V
Discharge period: 1, 2, 3, … 12 months
Lubricant volume: 60 cm³, 120 cm³ or 250 cm³
Operating temperature: -10 °C to +60 °C
Pressure build-up: 6 bar
Protection class: IP 65
Lubricants: Oil / grease up to NLGI 2
Certifications: UL

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

perma FLEX – the all-in-one lubrication system in two compact sizes

perma FLEX – the all-in-one lubrication system in two compact sizes

perma FLEX 125 – filled with Multipurpose Grease

Euerdorf. The basic requirement for long bearing and chain service life is optimum lubrication. Incorrect lubrication results in damages and equipment breakdown. The new all-in-one lubrication system perma FLEX from perma-tec provides reliable 24 hour, year round lubrication for all types of industries and applications.

Ready to go
perma FLEX is supplied read to use and requires no assembly or special tools. Just unpack, turn the rotary switch to the desired discharge period and screw into your lubrication point. The discharge period (in monthly steps of 1 to 12 months) can be changed anytime after activation. During longer machine downtimes, perma FLEX can be completely turned off and can be reactivated when the machines are up again. This flexibility makes perma FLEX ideal for the different requirements of your lubrication points.

The two sizes are perfect for small or tight spaces (size 125 cm³ = 117 mm high / size 60 cm³ = 85 mm high) and the transparent housing makes it easy for users to monitor the position of the lubricant delivery piston.

perma FLEX makes preventive maintenance practices easier and safer. Longer maintenance intervals and remote mounting significantly reduces the interface between maintenance staff and dangerous operating equipment. This increases workplace safety and is more cost effective.

Tried, tested, and proven
The system was successfully tested in the market. This practical experience shows that perma FLEX can be used on all applications that require reliable and optimum relubrication, e.g. on bearings, chains, sliding guides, open gears, gear racks, shaft seals and more. The system is extremely flexible and can even be mounted up-side-down. It performs reliably in extremely moist and dirty areas (protection class IP 68) and in hot and cold environments (-20 °C to +60 °C).

Service included
To ensure that perma FLEX matches all the requirements of your lubrication point, perma-tec offers the largest range of lubricants and accessories in the market of automatic lubrication systems. If you have any questions, our team of application engineers will be glad to help.

www.perma-tec.com (http://www.perma-tec.com)

perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

Keep your conveyors running with perma lubrication systems

Keep your conveyors running with perma lubrication systems

Flyer: perma Lubrcation Systems for Conveyors

EUERDORF. In many industries, process safety depends on conveyor reliability. The breakdown of a main feed conveyor could shut down the whole plant. Therefore, increasing conveyor performance is a major concern for many industries.

Conveyors are needed in all types of industries worldwide. They operate in difficult environments like the extreme weather of the quarrying industry or the hygienically sensitive conditions of the food industry. Proper conveyor lubrication is very important but also presents a challenge for a range of reasons. Application conditions are normally aggressive due to high levels of contamination and high loads. Maintenance teams are faced with long walking distances, ladders and stairs. Observing manufacturer recommended lubrication intervals is not easy – especially at hard to reach and dangerous lubrication points. But improper lubrication will damage conveyor systems and eventually results in equipment downtime.

Industries all over the world are relying on automatic lubrication systems from perma-tec for the lubrication of their conveyor systems. perma-tec is the leading manufacturer for automatic single-point lubrication systems and offers the largest product range – from simple, robust systems to Ex proof and machine controlled systems.

perma lubrication systems can be programmed to discharge the exact amount required by individual lubrication points over a certain period. This prevents over or under lubrication and contamination. Different applications require different lubrication systems, accessories and special lubricants. The lubrication specialists at perma-tec will help you select the right system and the ideal lubricant for your application. perma automatic lubrication systems help you to prevent costly machine downtimes because they seal conveyor bearings against water and dirt and they continuously provide the right lubricant, in the exact amount, at the right time. This results in longer equipment service life, less maintenance runs and increased workplace safety with remote installations.

If you would like to have more information about conveyor lubrication, please go to our web site www.perma-tec.com (http://www.perma-tec.com) (Download center) where you can either order or download a free copy of our special brochure.

perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Wirtschaft Handel Maschinenbau

The next generation of lubrication systems

The world’s first temperature independent electro-chemical lubrication system.

The next generation of lubrication systems

perma NOVA 130

EUERDORF. If you have ever used an electrochemical lubrication system, you know the effect that fluctuating ambient temperatures have on the discharge and the discharge period.

perma-tec, the leading manufacturer of single-point lubrication systems, introduces its newest invention – the perma NOVA.
perma NOVA has many great advantages. It offers continuous, temperature independent lubrication and lubrication periods from 1 to 12 months. It is also ex-proof certified and extremely user friendly.

We optimized our field approved and successful electro-chemical drive by adding another component. This new component automatically off-sets any temperature fluctuations.

For operators this means that perma NOVA can be used for applications that require dependable and optimized lubrication especially in areas with considerable temperature variations like in the food industry. The innovative control unit allows the user to select and easily program discharge periods from 1 to 12 months. And selected discharge periods can quickly be changed at any time in order to meet current lubrication requirements.

Its reliable function at temperatures ranging from -20 °C to
+60 °C ( -4 °F to +140 °F) makes perma NOVA ideal for the lubrication of belt conveyors, electric motors and chains. It is quickly installed, programmed and can be exchanged at any time.

perma NOVA will increase equipment reliability and minimize maintenance runs. It also increases workplace safety as it reduces the time that maintenance workers have to spend in dangerous areas. All of this leads to a significant reduction of maintenance costs.

More details on perma NOVA can be found in our product catalog or our website
www.perma-tec.com . Bildquelle:kein externes Copyright

perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

English Press Releases

perma STAR VARIO Generation 2.0 – Redefines user-friendliness

perma STAR VARIO Generation 2.0 - Redefines user-friendliness

The new perma STAR VARIO with user friendly LCD

Euerdorf – Lubrication plays an important role in maintenance programs. Equipment breakdowns caused by insufficient or incorrect lubrication can have fatal and costly consequences. In some cases they can even stop the entire production. Correct lubrication is therefore a basic requirement for trouble free operation. The new perma STAR VARIO ensures optimum lubrication regardless of changing temperatures, high counter pressure, or contamination at the lubrication point.

The electromechanical lubrication system was invented 15 years ago and has proven itself in all kinds of industries. The new version offers many improvements: LCD display with push button control, all around LED lights and a new design.
The LCD display with push button control is self-explanatory and makes programming extremely simple. The all around LED signal offers visual control of the operating status even from a distance. The system assembles and installs in just minutes. With a pressure build-up of up to 6 bar it works reliably over a wide temperature range from -10 °C to +60 °C.

Fast, easy set up
perma STAR VARIO consists of a transparent LC unit filled with oil or grease, a powerful battery set, and a reusable drive unit. Just insert the battery, screw drive unit and LC unit together, push the button to enter the desired discharge period (1 – 12 months) and LC size (60, 120, 250 cm³) and the system is ready to go.

One lubrication system for all types of applications
perma STAR VARIO is suitable for indoor or outdoor applications with high or low ambient temperatures. The high pressure build-up to 6 bar makes it possible to install perma STAR VARIO at remote locations, away from dangerous areas, with extension tubes up to a length of 5 meters. Not only does this save time when the lubrication system is exchanged, but it also tremendously reduces the risk of workplace accidents. With its three different sizes and many possible settings, perma STAR VARIO is a preferred system for electric motors with very specific relubrication amounts. The all around LED signal light lets you monitor the operational status from a distance. The new design protects the drive unit from water and makes the system better suited for applications in moist and wet surroundings.

Environmentally friendly lubrication
perma STAR VARIO can be individually programmed to exactly meet the lubrication requirements of different applications. The system continuously discharges small lubricant amounts at specified intervals. This lowers lubricant consumption and prevents over lubrication and lubricant spills. The reusable drive unit reduces maintenance costs and saves valuable resources.
We are taking service a step further

Our extensive perma accessory range includes connecting parts for just about all applications like electric motors, conveyor systems, pumps, fans and blowers. To make your start into perma automatic lubrication easier, we have developed special mounting sets. Our perma SELECT software helps you find the ideal lubrication system and the most suitable lubricant for your application. You can download it free of charge. Our team of lubrication experts will be glad to answer any questions, assist you with challenging applications, or visit you on site.

Technical data
Drive: Electromechanical, reusable
Power supply: STAR VARIO battery set 4.5 V
Discharge period: 1, 2, 3, … 12 months
Lubricant volume: 60 cm³, 120 cm³ or 250 cm³
Operating temperature: -10 °C to +60 °C
Pressure build-up: 6 bar
Protection class: IP 65
Lubricants: Oil / grease up to NLGI 2
Certifications: UL
Bildquelle:kein externes Copyright

perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

English Press Releases

perma Lubrication Systems for Electric Motors

perma Lubrication Systems for Electric Motors

Flyer: perma Lubrication Systems for Electric Motors

Electric motors are found in all types of applications – fans, blowers, pumps, conveyors, etc. The importance of the electric motor is usually not recognized until it fails. Optimal lubrication is the key to increase process safety, equipment service life and productivity.
Many electric motors are difficult to lubricate because they are located in hard-to-access and dangerous areas. perma-tec offers a variety of solutions which can ensure safe and continuous electric motor lubrication. Extension lines make it possible to install the systems in easily accessible and safe places. This not only increases workplace safety, but also ensures that electric motors are lubricated according to manufacturer specifications.

perma lubrication systems can also be mounted directly on electric motors – even during operation. The exchange is simple and requires no tools. This reduces maintenance time and expenses.

perma-tec offers single-point lubrication systems, multi-point lubrication systems and a large range of suitable accessories and lubricants. The lubricant amount can be individually programmed to meet individual motor requirements. This prevents excess lubrication and lubrication starvation.

For more information on electric motor lubrication please contact us or download the flyer „perma Lubrication Systems for Electric Motors“ from the perma website download center www.perma-tec.com.
Bildquelle:kein externes Copyright

perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

English Press Releases

perma Lubrication Systems for Pumps

perma Lubrication Systems for Pumps

Flyer: perma Lubrication Systems for Pumps

Pumps are often operated under extreme conditions. The direct contact of abrasive particles or slurry with moving parts of the pump can quickly lead to pump wear and premature pump failure. In order to reach the specified pump service life or to prolong it, the pump must be sealed to prevent the entry of solid contaminants and water. Sealing the shaft via the gland can only be ensured by permanently lubricating the packing.

Smooth and trouble-free process safety can only be achieved by providing the right lubricant amount specified for individual lubrication points. perma lubrication systems can be individually programmed to continuously supply lubrication points with fresh grease or oil according to manufacturer specifications. The systems are easily installed and can be exchanged quickly without tools. This reduces maintenance time and cost. Workplace safety can be drastically improved by installing the systems outside of dangerous areas and away from rotating machine parts.

perma lubrication systems hermetically seal lubrication points against contamination and water. The lubricant prevents premature wear or leakages from the shaft to the pump. Packing glands, labyrinths, electric motors or axle bearings receive optimum lubrication and are much less affected by environmental conditions.

For more information on pump lubrication please contact us or download the flyer „perma Lubrication Systems for Pumps“ from the perma website download center www.perma-tec.com .

perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt:
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

English Press Releases

perma Lubrication Systems for Blowers and Fans

perma Lubrication Systems for Blowers and Fans

Flyer: perma Lubrcation Systems for Blowers & Fans

Productivity, equipment reliability and workplace safety are directly linked to key performance indicators of blowers and fans. This makes efficient maintenance of machines and equipment extremely important to plant operators. Numerous grease points on blowers and fans must be lubricated regularly at short intervals. Extreme operating conditions and limited labor resources call for reliable and tough lubrication equipment in order to prevent costly machine downtime.

Automatic lubrication systems from perma-tec are successfully being used on blowers and fans worldwide. They are economical, meet technical demands and improve workplace safety.

We offer the largest product range in the area of automatic single-point lubrication. perma automatic lubricators reduce wear rates by providing a continuous supply of fresh lubricant. By ensuring against lubricant starvation or over lubrication and providing a practical method of preventing contaminants, perma automatic lubricators have the potential to prevent more than 50% of premature bearing failures.

perma-tec also offers a variety of greases and oils that are especially suited for specific applications and for use in perma lubrication systems.

The lubrication of fan and blower bearings is often demanding. Most applications cannot be lubricated during operation because it is too dangerous for maintenance personnel. As a consequence, these lubrications points are often neglected which damages bearings and eventually leads to costly machine downtimes. perma lubrication systems minimize the risk of workplace accidents. They reduce the need for frequent manual lubrication runs and can be mounted away from dangerous or hard to access lubrication points.

If you would like to know more about how to reduce maintenance costs, prevent bearing failures and increase workplace safety, please go to our Download center at www.perma-tec.com to get your free copy of our new flyer for „Blowers and Fans“.

perma-tec has been providing innovative and creative lubrication solutions for many years. Our single- and multi-point lubrication systems can be found in all types of industries and applications around the world.

perma-tec’s leadership in single-point lubrication is based on many patents and specially certified products. All perma products meet „Made in Germany“ quality standards because they are developed, tested and manufactured at our German headquarters.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet the highest technical requirements.

Kontakt:
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com