Tag Archives: cleaning machine

Trading Services

Photorealistic sandblasting without high pressure

Sounds impossible, but it works!

Photorealistic sandblasting without high pressure

Photorealistic sandblasting

It is operated with negative instead of high pressure. This by patent law protected principle is a combined unit of a powerful suction unit, a jet hood and blast media absorption. For blasting only a power supply of 230V is required.

The blast equipment is build up in a few minutes and ready to work. Because it is works without high pressure, water and chemicals in a closed cycle, the costly disposal of polluted detergents doesn´t apply. Debris and granules are absorbed again directly from the blast equipment.

The sandblast foil is glued on the granite surface. Then the jet hood is place on the surface to be machined and the unit is started. Due to the reached negative pressure the jet hood adheres to the subsoil. The blasting agent is sucked through a jet lance on the surface with approximately 400 km/h.

The suction absorbs the blast media directly. Blast media and debris are separated by cyclone principle. That way no dust develops during blasting. The work is environmentally friendly and afterwards the blast media doesn´t have to be collected and swept up. The vacuum blast method is operating in a permanent cycle. The same granulate can be re-used up to 100 times.

That way writing, graphics and photos can be applied directly on the cemetery or workshop.
Even the finest details on photos, graphics and QR-codes can be blasted on the material with astonishing depth. If motifs are blasted with the high-resolution foil of Strahlfolien.de, you can relocate the jet cap easily without damaging or moving the pixels of the sandblast foil. That way, Also bigger motifs can be created good and safe – even on site of the cemetery.

Lately the demand of QR codes on tombstones has significantly increased. Many customers would like to put QR codes on the tombstone subsequently. No problem for vacuum blast machine Tornado ACS. For a photo of the size 20 x 20 cm it takes about 30 minutes on site.

The jet hood is equipped with a soft and smooth sponge rubber layer, so that also uneven and strained surfaces can be blasted. That way it is possible to remove pollutes and graffiti from facades and rough cast.

Unfortunately you find them everywhere, graffiti of all sizes on facades, monument, bridges and other buildings. Especially very nice objects are used as undercoat. There are many different methods for the removal of graffiti depending on surface and size. Definitely the graffiti has to disappear quickly. A rule applies: the earlier graffiti is removed, the easier it is.
Here as well the vacuum blast machine can be used mobile and without polluting the environment. Cleaning can be done during public business. Special safety measures are not required. Find out more about photorealistic sandblasting at http://www.sys-teco.com

Uwe Dyballa
General Manager

production and sales of vacuum blasting systems

Kontakt
systeco Vertriebs GmbH
Uwe Dyballa
Herbartstraße 28
14057 Berlin
+493032702157
dyballa@sys-teco.de
http://www.sys-teco.com

Trading Services

Cleaning of travertine with Tornado ACS

Cleaning of travertine with Tornado ACS

cleaning of travertine

With negative instead of high-pressure – the perfect alternative to a pressure washer

Travertine is a wonderful natural stone, which is difficult to clean due to its large pores. Unfortunately, this stone pollutes very strongly during the years and becomes then quite unsightly. This applies to both front walls and floors.

For cleaning floors and wall coverings, wet grinding was used so far. A method in which the travertine stone is grinded in several steps and is then impregnated. Thereto spacious barriers are necessary. Stairwells are usually not accessible for the time of cleaning, and during the facade cleaning needs to be ensured, that pedestrians will not come to harm.
For contaminations caused by graffiti, very often chemical means are used for cleaning, what causes that the dissolved paint penetrates even deeper into the stone.

There is another way – without high-pressure, water and chemicals. The patented cleaning machine Tornado ACS, works with a unique future-oriented vacuum blasting method wand special granulate. The minimal-abrasive technology enables an eco friendly cleaning of surfaces. With the vacuum blast method, travertine can be easily cleaned. A barrier around the work area is not necessary.

Cleaning of travertine slabs on the floor, especially in hallway and staircase areas, is possible during public business, since the cleaning takes place in a closed cycle. The used granulate can be reused again up to a 100 times. The entire removal remains in the closed cycle of the system, and is disposed only when the filter is cleaned.

The work can be done by anyone. Special knowledge is not required. The closed cycle of the cleaning equipment enables a dustfree work without protective clothing.

Systeco stands for effective and environmentally friendly cleaning procedures. With our patented vacuum blasting method we have developed future oriented cleaning machines. The company guarantees a solid quality of its long-lasting products. Find comprehensive information about systeco´s cleaning technology and the various possibilities of the Tornado ACS cleaning machine on our website www.systeco.com (http://www.sys-teco.com)

production and sales of vacuum blasting systems

Kontakt
systeco Vertriebs GmbH
Uwe Dyballa
Herbartstraße 28
14057 Berlin
+493032702157
dyballa@sys-teco.de
http://www.sys-teco.com

Trading Services

boat cleaning and lacquer removal from boats

boat cleaning and lacquer removal from boats

Boat cleaning on a trailer

cleaning equipment Tornado ACS – the ideal alternative to grinding and sand blasting

Boats must be cleaned regularly in the sub-region and stripped before repainting. The conventional methods are grinding and sandblasting. Both methods are very stressful, time consuming and cause a lot of flying debris. In addition, various protective measures must be adhered to during sandblasting.

There is another way – without High Pressure, Water and Chemicals. The patented Tornado ACS cleaning machine works according to a unique future oriented vacuum blast method with special granules. The minimally abrasive technology allows an eco friendly cleaning, stripping and decoating of surfaces. With the vacuum blast method it is cleaned in a permanent cycle. The granules can be reused again (up to 100 times). The cleaning equipment is easy to use and applicable for everyone. Thus, the cleaning machine Tornado ACS is the ideal alternative to grinding, sand blasting machines and dry ice blasting.

With the cleaning machine Tornado ACS a boat can be easily cleaned and have paint removed on a trailer without polluting the environment. The surfaces to be stripped to the hull, can be fixed well. To mask the remaining areas is not necessary.
The Tornado ACS is a worthwhile investment for any boat club and every marina. Especially for small clubs, this cleaning technology suits perfectly. Due to the closed cycle of this vacuum blasting method, all paint and dirt residues and granules remain inside of the system. Since neither high pressure, water nor chemicals are used, protective clothing and barriers are not necessary during the boat cleaning.

In addition, the cleaning machine is often used in graffiti removal, facade cleaning, fire damage restoration and saltpetre and lime removal. Systeco stands for effective and eco friendly cleaning methods. With our patented vacuum blasting method we have developed future oriented cleaning machines. The company guarantees the quality of its solid long-lasting products. On our website www.sys-teco.com you can get comprehensive information about the systeco cleaning technology and the many possibilities of the Tornado ACS cleaning machine.

Uwe Dyballa
systeco Vertriebs GmbH
Herbartstraße 28
14057 Berlin
info@sys-teco.de
Bildquelle:kein externes Copyright

production and sales of vacuum blasting systems
production and sales of vacuum blasting systems

systeco Vertriebs GmbH
Uwe Dyballa
Herbartstraße 28
14057 Berlin
+493032702157
dyballa@sys-teco.de
http://www.sys-teco.com

Trading Services

Graffiti removal on EIFS-Facades

Graffiti removal on EIFS-Facades

Eco friendly and simple with cleaning equipment Tornado ACS

Unfortunately you find them everywhere. Graffitis of all sizes on facades, monuments, bridges and other buildings. It is mostly beautiful objects which are used as a base. Especially popular are EIFS facades, which are mostly painted white.
There are many different methods for graffiti removal, depending on the surface and size. In any case, graffitis must be removed very shortly, otherwise there will be more quickly. In addition, the earlier graffiti is removed – the easier it is, which applies in
We have developed cleaning machines, which removes graffitis on all mineral surfaces without leaving residues and without polluting the environment. The cleaning technique is particularly well suited for EIFS facades, since neither the delicate plaster layer nor the underlying insulation is damaged. Cleaning can be done in public, barriers are not necessary.

The patented vacuum blast method allows a clean and environmentally friendly work. The cleaning unit is built in a few minutes and ready for use. The costly disposal of soiled cleaning materials omitts, as it cleans without high pressure, water and chemicals. The cleaning machine Tornado ACS is easy to use by everyone.

With the Tornado ACS cleaning technology graffiti on brick, natural stone, concrete, paint, tile, plastic and many other surfaces can be removed easily and quickly.
Therefore our cleaning machine is the ideal alternative to a high-pressure cleaner and dry ice blasting. The minimally abrasive procedure protects the surface to be worked on. Due to the closed circuit, no protective clothing is required. Further information you can find at www.sys-teco.com

Uwe Dyballa
systeco Vertriebs GmbH
Herbartstraße 28
14057 Berlin
info@sys-teco.de
Bildquelle:kein externes Copyright

production and sales of vacuum blasting systems
production and sales of vacuum blasting systems

systeco Vertriebs GmbH
Uwe Dyballa
Herbartstraße 28
14057 Berlin
+493032702157
dyballa@sys-teco.de
http://www.sys-teco.com