Tag Archives: blowers

Science Research Technology

perma Lubrication Systems for Electric Motors

perma Lubrication Systems for Electric Motors

perma STAR VARIO are lubricating an Electric Motor

Euerdorf, Germany – Electric motors are found in all types of applications – fans, blowers, pumps, conveyors, etc. The importance of the electric motor is usually not recognized until it fails. Optimal lubrication is the key to increase process safety, equipment service life and productivity.

Many electric motors are difficult to lubricate because they are located in hard-to-access and dangerous areas. As a result, many lubrication points on labyrinth seals and on drive- and non-drive sides are not lubricated as often as required, which leads to damaged bearings and eventually equipment failure.

perma-tec offers single- and multi-point lubrication systems and a large range of suitable accessories which ensure safe and continuous electric motor lubrication. Extension lines make it possible to install the systems in easily accessible and safe places. This not only increases workplace safety, but also ensures that electric motors are lubricated according to manufacturer specifications. System exchanges can be carried out without any special tools and can be scheduled to take place during regular maintenance runs. This reduces maintenance time and expenses.

The single-point lubrication system perma NOVA is ideal for the lubrication of electric motors. It is temperature independent (at -20 °C to +60 °C) and the discharged lubricant amount can be programmed to meet individual motor requirements. A precise lubricant discharge during operation prevents lubrication starvation as well as over-lubrication. It reduces lubricant consumption and contributes to environmental protection. The housing is dust-tight and protected against water jets (IP65).

For more information on electric motor lubrication you may download our flyer „perma Lubrication Systems for Electric Motors“ from the perma website download center www.perma-tec.com or view our Video „Electric motors“.

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

English Press Releases

perma NOVA: Temperature Independent Electrochemical Lubrication System

perma NOVA: Temperature Independent Electrochemical Lubrication System

perma NOVA 125 on a blower

Euerdorf, Germany – If you have ever used electrochemical lubrication systems, you know the effect that fluctuating ambient temperatures have on lubricant discharge and discharge period. perma-tec, the leading manufacturer of single-point lubrication systems, was successful in developing the perma NOVA, an electrochemical system which can compensate temperature fluctuations.

Continuous lubrication – even at fluctuating temperatures

perma-tec optimized its electrochemical drive by adding a component which automatically off-sets temperature fluctuations. For operators this means that perma NOVA can be used for applications that require reliable and optimized lubrication especially in areas with considerable temperature variations like in the food industry or in outdoor applications. The innovative control unit allows the user to select and program discharge periods from 1 to 12 months. Selected discharge periods can quickly be changed at any time in order to meet current lubrication requirements.

perma NOVA comes in two sizes (65 cm³ / 125 cm³) and is ideal for the lubrication of electric motors or blowers and fans operating at temperatures ranging from -20 °C to+60 °C and for applications in ex-proof areas. It is extremely easy to use, to install and to exchange. The transparent housing makes it possible to check the fill level at any time.

Optimized maintenance intervals

perma NOVA reduces maintenance costs by minimizing maintenance runs and increasing equipment availability. At the same time it increases workplace safety as it reduces the time that maintenance workers have to spend in dangerous areas. More details on perma NOVA can be found in our product catalog or our website www.perma-tec.com (http://www.perma-tec.com).

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Business Economy Finances

perma STAR VARIO Generation 2.0 – Redefines User-friendliness

perma STAR VARIO Generation 2.0 - Redefines User-friendliness

perma STAR VARIO

Euerdorf, Germany – Lubrication plays an important role in maintenance programs. Equipment breakdowns caused by insufficient or incorrect lubrication can have fatal and costly consequences. In some cases they can even stop the entire production. Correct lubrication is therefore a basic requirement for trouble-free operation. The new perma STAR VARIO ensures optimum lubrication regardless of changing temperatures, high counter pressure, or contamination at the lubrication point.

The electromechanical lubrication system was invented 15 years ago and has proven itself in all kinds of industries. The new version offers many improvements: LCD-display with push button control, all around LED lights and a new design.

The LCD-display with push button control is self-explanatory and makes programming extremely simple. The all around LED signal offers visual control of the operating status even from a distance. The system assembles and installs in just minutes. With a pressure build-up of up to 6 bar it works reliably over a wide temperature range from -10 °C to +60 °C.

Fast, easy set up

perma STAR VARIO consists of a transparent LC unit filled with oil or grease, a powerful battery set, and a reusable drive unit. Just insert the battery, screw drive unit and LC unit together, push the button to enter the desired discharge period (1 – 12 months) and LC size (60, 120, 250 cm³) and the system is ready to go.

One lubrication system for all types of applications

perma STAR VARIO is suitable for indoor or outdoor applications with high or low ambient temperatures. The high pressure build-up to 6 bar makes it possible to install perma STAR VARIO at remote locations, away from dangerous areas, with extension tubes up to a length of 5 meters. Not only does this save time when the lubrication system is exchanged, but it also tremendously reduces the risk of workplace accidents. With its three different sizes and many possible settings, perma STAR VARIO is a preferred system for electric motors with very specific relubrication amounts. The all around LED signal light lets you monitor the operational status from a distance. The new design protects the drive unit from water and makes the system better suited for applications in moist and wet surroundings.

Environmentally friendly lubrication

perma STAR VARIO can be individually programmed to exactly meet the lubrication requirements of different applications. The system continuously discharges small lubricant amounts at specified intervals. This lowers lubricant consumption and prevents over-lubrication and lubricant spills. The reusable drive unit reduces maintenance costs and saves valuable resources. We are taking service a step further.

Our extensive perma accessory range includes connecting parts for just about all applications like electric motors, conveyor systems, pumps, fans and blowers. To make your start into perma automatic lubrication easier, we have developed special mounting sets. Our perma SELECT software helps you find the ideal lubrication system and the most suitable lubricant for your application. You can download it free of charge. Our team of lubrication experts will be glad to answer any questions, assist you with challenging applications, or visit you on site.

Technical data:

Drive – reusable: Electromechanical
Power supply: STAR VARIO battery set 4.5 V
Discharge period: 1, 2, 3, … 12 months
Lubricant volume: 60 cm³, 120 cm³ or 250 cm³
Operating temperature: -10 °C to +60 °C
Pressure build-up: 6 bar
Protection class: IP 65
Lubricants: Oil / grease up to NLGI 2
Certifications: UL

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

perma FLEX – The All-in-one Lubrication System in Two Compact Sizes

perma FLEX - The All-in-one Lubrication System in Two Compact Sizes

perma FLEX on a fan

Euerdorf, Germany – The basic requirement for a long bearing / chain service life is optimum lubrication. In-correct lubrication results in damages and equipment breakdown. The new all-in-one lubrication system perma FLEX from perma-tec provides reliable 24 hour, year round lubrication for all types of industries and a-plications.

Immediately ready to use

perma FLEX requires no assembly or special tools. Just unpack, turn the rotary switch to the desired discharge period and screw the system into your lubrication point. The discharge period (in monthly steps of 1 to 12 months) can be changed anytime after activation and the two sizes are perfect for small or tight spaces (size 125 cm³ = 117 mm high / size 60 cm³ = 85 mm high). During longer machine downtimes, perma FLEX can be completely turned off. This flexibility makes perma FLEX ideal for different lubrication point requirements.
perma FLEX makes preventive maintenance practices easier and safer. Longer maintenance intervals and remote mounting significantly reduce the interface between maintenance staff and dangerous operating equipment. This in-creases workplace safety and is more cost effective.

Tried, tested, and proven

The system was successfully tested in the market. The practical experience shows that perma FLEX can be used on all applications that require reliable and optimum relubrication, e.g. on bearings, chains, sliding guides, open gears, gear racks, shaft seals and more. The system is extremely flexible and can even be mounted up-side-down. It performs reliably in extremely moist and dirty areas (protection class IP 68) and in hot and cold environments (-20 °C to +60 °C).

Service included

To ensure that perma FLEX matches all requirements of your lubrication point, perma-tec offers the largest range of lubricants and accessories in the market of automatic lubrication systems. If you have any questions, our team of application engineers will be glad to help. If requested, our perma SERVICE team will come to your premises.

Technical Data
Drive: Gas generating unit
Discharge period: 1, 2, 3, … 12 months
Lubricant volume: 60 cm³ or 125 cm³
Operating temperature range: -20 °C to +60 °C
Pressure build-up: Max. 5 bar
Protection class: IP 68
Lubricants: Grease up to NLGI 2 / oil
Certification: Ex-proof

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

perma Lubrication Systems for Electric Motors

perma Lubrication Systems for Electric Motors

Flyer: perma Lubrication Systems for Electric Motors

Euerdorf, Germany – Electric motors are found in all types of applications – fans, blowers, pumps, conveyors, etc. The importance of the electric motor is usually not recognized until it fails. Optimal lubrication is the key to increase process safety, equipment service life and productivity.

Many electric motors are difficult to lubricate because they are located in hard-to-access and dangerous areas. As a result, many lubrication points on labyrinth seals and on drive- and non-drive sides are not lubricated as often as required, which leads to damaged bearings and eventually equipment failure.

perma-tec offers single- and multi-point lubrication systems and a large range of suitable accessories which ensure safe and continuous electric motor lubrication. Extension lines make it possible to install the systems in easily accessible and safe places. This not only increases workplace safety, but also ensures that electric motors are lubricated according to manufacturer specifications. System exchanges can be carried out without any special tools and can be scheduled to take place during regular maintenance runs. This reduces maintenance time and expenses.

The single-point lubrication system perma NOVA is ideal for the lubrication of electric motors. It is temperature independent (at -20 °C to +60 °C) and the discharged lubricant amount can be programmed to meet individual motor requirements. A precise lubricant discharge during operation prevents lubrication starvation as well as over-lubrication. It reduces lubricant consumption and contributes to environmental protection. The housing is dust-tight and protected against water jets (IP65).

For more information on electric motor lubrication you may download our flyer „perma Lubrication Systems for Electric Motors“ from the perma website download center www.perma-tec.com (http://www.perma-tec.com)m or view our Video „Electric motors“.

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Straße 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

perma Lubrication Systems for Conveyors

perma Lubrication Systems for Conveyors

Title / Flyer: perma Lubrication Systems for Conveyors

Euerdorf, Germany – Conveyors are needed in all types of industries worldwide. They operate in difficult environments like the extreme weather of the quarrying industry or the hygienically sensitive conditions of the food industry. Proper conveyor lubrication is very important, but also presents a challenge for a range of reasons.
Application conditions are normally aggressive due to high levels of contamination and high loads. Long walking distances, ladders and stairs are often needed for the manual lubrication of drive and guide pulleys. Rotating conveyor belts make it difficult and dangerous to manually lubricate the equipment. Manufacturer recommended lubrication intervals can hardly be met. But improper lubrication damages conveyor systems and eventually results in equipment downtime.
perma STAR VARIO is ideal for the lubrication of conveyor systems. It can be programmed to discharge the exact amount of lubricant required by individual lubrication points over a certain period. This prevents over or under lubrication and contamination.
Different applications require different lubrication systems, accessories and special lubricants. The lubrication specialists at perma-tec will help you select the ideal lubricant, the right system and the best accessories to fit your application. perma Automatic lubrication systems help you to prevent costly machine downtimes because they seal conveyor bearings against water and dirt and continuously provide the right lubricant, in the exact amount, at the right time. This results in longer equipment service life and less maintenance. Exchanges can be scheduled and do not require any special tools. Our large range of accessories and extensions makes it easy to lubricate any lubrication point. Hard-to-reach and dangerous lubrication points can easily be lubricated with extension lines. This reduces the time that workers spend in these areas and increases workplace safety.
For more information on conveyor lubrication you may download our flyer „perma Lubrication Systems for Conveyors“ from the perma website download center www.perma-tec.com (http://www.perma-tec.com) or view our Video „Conveyors“.

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.
perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.
With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

perma Lubrication Systems: Electric Motors

perma Lubrication Systems: Electric Motors

Flyer: perma Lubrication Systems: Electric Motors

Electric motors are found in all types of applications – fans, blowers, pumps, conveyors, etc. The importance of the electric motor is usually not recognized until it fails. Optimal lubrication is the key to increase process safety, equipment service life and productivity.

Many electric motors are difficult to lubricate because they are located in hard-to-access and dangerous areas. perma-tec offers a variety of solutions which can ensure safe and continuous electric motor lubrication. Extension lines make it possible to install the systems in easily accessible and safe places. This not only increases workplace safety, but also ensures that electric motors are lubricated according to manufacturer specifications.

perma lubrication systems can also be mounted directly on electric motors – even during operation. The exchange is simple and requires no tools. This reduces maintenance time and expenses.

perma-tec offers single-point lubrication systems, multi-point lubrication systems and a large range of suitable accessories and lubricants. The lubricant amount can be individually programmed to meet individual motor requirements. This prevents excess lubrication and lubrication starvation.
For more information on electric motor lubrication please contact us or download the flyer „perma Lubrication Systems for Electric Motors“ from the perma website download center www.perma-tec.com (http://www.perma-tec.com) .

perma-tec has been providing innovative and creative lubrication solutions for more than 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.
perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.
With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

perma FLEX – the all-in-one lubrication system in two compact sizes

perma FLEX – the all-in-one lubrication system in two compact sizes

perma FLEX 125 – filled with Multipurpose Grease

Euerdorf. The basic requirement for long bearing and chain service life is optimum lubrication. Incorrect lubrication results in damages and equipment breakdown. The new all-in-one lubrication system perma FLEX from perma-tec provides reliable 24 hour, year round lubrication for all types of industries and applications.

Ready to go
perma FLEX is supplied read to use and requires no assembly or special tools. Just unpack, turn the rotary switch to the desired discharge period and screw into your lubrication point. The discharge period (in monthly steps of 1 to 12 months) can be changed anytime after activation. During longer machine downtimes, perma FLEX can be completely turned off and can be reactivated when the machines are up again. This flexibility makes perma FLEX ideal for the different requirements of your lubrication points.

The two sizes are perfect for small or tight spaces (size 125 cm³ = 117 mm high / size 60 cm³ = 85 mm high) and the transparent housing makes it easy for users to monitor the position of the lubricant delivery piston.

perma FLEX makes preventive maintenance practices easier and safer. Longer maintenance intervals and remote mounting significantly reduces the interface between maintenance staff and dangerous operating equipment. This increases workplace safety and is more cost effective.

Tried, tested, and proven
The system was successfully tested in the market. This practical experience shows that perma FLEX can be used on all applications that require reliable and optimum relubrication, e.g. on bearings, chains, sliding guides, open gears, gear racks, shaft seals and more. The system is extremely flexible and can even be mounted up-side-down. It performs reliably in extremely moist and dirty areas (protection class IP 68) and in hot and cold environments (-20 °C to +60 °C).

Service included
To ensure that perma FLEX matches all the requirements of your lubrication point, perma-tec offers the largest range of lubricants and accessories in the market of automatic lubrication systems. If you have any questions, our team of application engineers will be glad to help.

www.perma-tec.com (http://www.perma-tec.com)

perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Science Research Technology

Keep your conveyors running with perma lubrication systems

Keep your conveyors running with perma lubrication systems

Flyer: perma Lubrcation Systems for Conveyors

EUERDORF. In many industries, process safety depends on conveyor reliability. The breakdown of a main feed conveyor could shut down the whole plant. Therefore, increasing conveyor performance is a major concern for many industries.

Conveyors are needed in all types of industries worldwide. They operate in difficult environments like the extreme weather of the quarrying industry or the hygienically sensitive conditions of the food industry. Proper conveyor lubrication is very important but also presents a challenge for a range of reasons. Application conditions are normally aggressive due to high levels of contamination and high loads. Maintenance teams are faced with long walking distances, ladders and stairs. Observing manufacturer recommended lubrication intervals is not easy – especially at hard to reach and dangerous lubrication points. But improper lubrication will damage conveyor systems and eventually results in equipment downtime.

Industries all over the world are relying on automatic lubrication systems from perma-tec for the lubrication of their conveyor systems. perma-tec is the leading manufacturer for automatic single-point lubrication systems and offers the largest product range – from simple, robust systems to Ex proof and machine controlled systems.

perma lubrication systems can be programmed to discharge the exact amount required by individual lubrication points over a certain period. This prevents over or under lubrication and contamination. Different applications require different lubrication systems, accessories and special lubricants. The lubrication specialists at perma-tec will help you select the right system and the ideal lubricant for your application. perma automatic lubrication systems help you to prevent costly machine downtimes because they seal conveyor bearings against water and dirt and they continuously provide the right lubricant, in the exact amount, at the right time. This results in longer equipment service life, less maintenance runs and increased workplace safety with remote installations.

If you would like to have more information about conveyor lubrication, please go to our web site www.perma-tec.com (http://www.perma-tec.com) (Download center) where you can either order or download a free copy of our special brochure.

perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

Kontakt
perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com

Wirtschaft Handel Maschinenbau

The next generation of lubrication systems

The world’s first temperature independent electro-chemical lubrication system.

The next generation of lubrication systems

perma NOVA 130

EUERDORF. If you have ever used an electrochemical lubrication system, you know the effect that fluctuating ambient temperatures have on the discharge and the discharge period.

perma-tec, the leading manufacturer of single-point lubrication systems, introduces its newest invention – the perma NOVA.
perma NOVA has many great advantages. It offers continuous, temperature independent lubrication and lubrication periods from 1 to 12 months. It is also ex-proof certified and extremely user friendly.

We optimized our field approved and successful electro-chemical drive by adding another component. This new component automatically off-sets any temperature fluctuations.

For operators this means that perma NOVA can be used for applications that require dependable and optimized lubrication especially in areas with considerable temperature variations like in the food industry. The innovative control unit allows the user to select and easily program discharge periods from 1 to 12 months. And selected discharge periods can quickly be changed at any time in order to meet current lubrication requirements.

Its reliable function at temperatures ranging from -20 °C to
+60 °C ( -4 °F to +140 °F) makes perma NOVA ideal for the lubrication of belt conveyors, electric motors and chains. It is quickly installed, programmed and can be exchanged at any time.

perma NOVA will increase equipment reliability and minimize maintenance runs. It also increases workplace safety as it reduces the time that maintenance workers have to spend in dangerous areas. All of this leads to a significant reduction of maintenance costs.

More details on perma NOVA can be found in our product catalog or our website
www.perma-tec.com . Bildquelle:kein externes Copyright

perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.

perma-tec´s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company´s German headquarters and live up to the „Made in Germany“ quality.

With many years of experience and a network of subsidiaries and competent partners around the world we can offer our customers lubrication solutions that meet highest technical requirements.

perma-tec GmbH & Co. KG
Doris Bauer
Hammelburger Str. 21
97717 Euerdorf
+49 9704 609-3663
d.bauer@perma-tec.de
http://www.perma-tec.com